news

Currently, many countries face the following difficulties in dealing with waste drilling mud:(1) Because some oilfields do not have a comprehensive and systematic understanding and understanding of the harmless treatment of waste drilling mud, there is basically no good method for the treatment of m

Currently, many countries face the following difficulties in dealing with waste drilling mud:

(1) Because some oilfields do not have a comprehensive and systematic understanding and understanding of the harmless treatment of waste drilling mud, there is basically no good method for the treatment of mud, and the natural drying method is still used. Moreover, this method covers a large area and lacks technological innovation.

(2) The oilfield industry cannot properly allocate funds when dealing with waste drilling mud. A large proportion of its capital arrangement is used for transportation costs, which greatly reduces the cost of treatment equipment and mud treatment agents, which is not conducive to better and harmless treatment of mud.

(3) At present, the management systems for waste drilling mud storage in major oilfields are not systematic enough or even confused. When we are dealing with mud in different well areas, we have not been able to classify it and store it in batches. This undoubtedly increases the difficulty of the work in the harmless treatment of the mud.

(4) Due to the special environment of oilfield operation, the difficulty of mud treatment operation is increased. Many oil fields in China are located in coastal areas, near crop-growing areas or residential areas. In the harmless treatment of waste drilling mud, it is necessary to strictly follow the national emission standards. Since there are crops and residents around, the treatment should be very lower than the national emission standards.

At present, there are three main treatment methods for waste drilling mud in major oil fields: natural sunlight; curing treatment; centralized treatment in different places. Generally speaking, due to the different properties and types of waste mud produced by oil wells in various areas of the oilfield, some muds contain glutenite and are not crushed, which greatly increases the difficulty of treatment. There is also a disadvantage: most of the waste mud produced by the oil wells of the oil production plants is in the periphery of the mud treatment company, which leads to high transportation costs. After the mud water content is still very large.

Drilling mud treatment technology is indispensable in the development process of our country. With the continuous development of economy in recent years, my country's oil drilling mud treatment technology is also constantly being optimized. The application of new technologies and new theories can improve the efficiency of mud treatment. The improvement will help meet the needs of oil drilling and construction in the later stage of development, and at the same time, it is more necessary to exert the function of mud as much as possible. Desen Environment has recently developed a drilling mud treatment equipment - mobile washing and repairing vehicle. It can travel through various complex sites, especially suitable for ecological and environmental protection projects with a small amount of engineering and high requirements on the project site space. It has the remarkable characteristics of wide application range, small footprint, fast and flexible transition, fast and convenient installation, and low-consumption and high-efficiency operation. At the same time, it can also be equipped with a 5G intelligent system, which can realize intelligent operation, conduct remote monitoring with the government platform, avoid risks and ensure the smooth completion of the project.